Technical Specifications
Acoustune HS2000 MKIII 產品規格
ACT47 腔體物料:純銀
ACT47 單元:10 mm 日本鈹薄膜圓頂 Myrinx Composite 動圈單元
頻率響應:10Hz – 30KHz
輸入靈敏度 (dB/mW):110dB(@1KHz / 1mW)
阻抗:24Ω @1kHz
插座制式: Pentaconn Ear
配件: ARX500 系列耳機線、便攜盒、AEX07 耳膠、AEX50 耳膠、AEX70 耳膠
AURORA (Special Edition) Specification
Design : 12 balanced armature driver with 5-way crossover design
——————-
LF : 2 BA
LMF : 2 BA
MF : 2 BA
MHF : 4 BA
SHF : 2 BA
——————-
IPP Technology : 4 Pipe
——————-
Sensitivity : 121dB
Frequency response : 11Hz-25kHz
Impedance : 10 ohms
| Element | Φ10 mm dynamic type |
|---|---|
| Acoustic technology | Tornado turbo |
| Sensitivity | 106 dBSPL/mW |
| Frequency response | 5 Hz ~ 40 kHz (Hi Res Compatible) |
| Maximum input | 200 mW |
| Impedance | 18 Ω |
| Mass | Approx 13 g |
| Cord | 1.2 m with gold plated plug |
TECHNICAL SPECIFICATIONS
Frequency response
8Hz-25kHz
Impendence
16 ohm
Sensitivity
110dB@1kHz
Drive configuration
1 Dynamic, 4 Balanced armatures, 2 Electrostatic, 4-way crossover
Acoustic design
4-Way sound tube w/ ATR (Air Transmission Routing)
Plug type
PLUG&LOCK 4.4, 2.5, 3.5mm plug ; 2-pin (0.78mm) earphone plug
Shanling M3 Ultra Specifications:
Dimensions:109 X 70.5 X 18 mm
Weight: 199 g
Screen:4.2-inch 768 x 1280 Touch Screen
Hi-Res Support:32 bit / 384 kHz, DSD 256
Memory:3 GB RAM & 32 GB ROM & MicroSD card slot
Battery: 3500 mAh, QC3.0 18W compatible
Battery Life: 20.5h Single DAC 3.5mm, 14.5h Balanced
Wi-Fi: 2.4G / 5G
Bluetooth:Version 5.0
As Transmitter:LDAC / aptX HD / aptX / SBC
As Receiver:LDAC / SBC
Single-Ended Output:
Output Power
Low Gain: 41mW @32 Ohm
High gain: 140mW @32 Ohm
Output Impedance:<1 Ohm
Balanced Output:
Output Power
Low Gain: 164mW @32 Ohm
High gain: 260mW @32 Ohm
Output Impedance:<1 Ohm
| ZERO DC Block technology | Blocks incoming DC – up to 1,200mV |
| Voltage rating | 90 – 250 volts |
| Maximum current rating | ≤14A |
| Max amplifier power | 2200W or VA on 220V ~ 1100W or VA on 110V ~ |
| Continuous current rating | 10A |
| Universal IEC | Hospital-grade IEC connectors |
| Dimensions | 75 x 46 x 32 mm / 3.0” x 1.8” x 1.3” |
| Weight | 80 g (2.8 oz) |
| 驅動單元: 4動鐵單元(4路分音) 輸出感度: 107.7 dB 頻率響應: 10Hz〜19,500Hz 抗阻: 可變 耳機接頭: CIEM 2pin 接頭: Φ3.5mm立體聲插頭 |
驅動單元:
6動鐵單元(5路分音)
輸出感度:
107.3 dB
頻率響應:
10Hz〜18,000Hz
抗阻:
22Ω
耳機接頭:
CIEM 2pin
接頭:
Φ3.5mm立體聲插頭
產品參數
產品名稱:骨傳導藍牙耳機
產品型號:Breezy ITG01
藍牙版本:Bluetooth v5.3
材質:CNC鋁合金
防護等級:IPX6
電池容量:210mAh(耳機)350mAh(充電倉)
充電時長:2小時
續航時間:6.5小時(搭配TWS磁吸充電倉可達16.5小時)
| Input | USB-C | |
| Formats Supported | DSD256 / PCM384kHz / Full MQA Decoder | |
| DAC | Burr Brown | |
| Headphone Outputs | 4.4mm, 3.5mm | |
| Power Output | BAL | 400mW @ 32Ω; 6.3V @ 600Ω |
| UnBAL | 280mW @ 32Ω; 3.2V @ 600Ω | |
| SNR | BAL | <109dB(A) @ 0dBFS |
| UnBAL | <103dB(A) @ 0dBFS | |
| DNR | BAL | <109dB(A) |
| UnBAL | <103dB(A) | |
| THD + N | BAL | <0.006X% (360mW/2.0V @ 600Ω) |
| UnBAL | <0.01% (100mW/1.27V @ 16Ω) | |
| Frequency Response | 20Hz – 45kHz (-3dB) | |
| Power Consumption | <2W idle, 4W max | |
| Battery | Lithium-polymer 2,200mAh up to 12 hours |
|
| Power System | Charging via USB-C, BC V1.2 compliant up to 1000mA charging current | |
| Dimensions | 102 x 70 x 14 mm (4.0″ x 2.8″ x 0.6″) | |
| Net weight | 135 g |
| Wearing style | Bluetooth Wireless Over-Ear Headphones |
| Technical features | Hybrid Noise Cancellation Ambient Pass-Through Wear-Detection Sensor Bluetooth® audio – Bluetooth 5.2 with aptX™ Adaptive USB-C charging & audio interface |
| Bluetooth codecs | aptX™ Adaptive aptX™ HD aptX™ AAC SBC |
| Bluetooth profiles | A2DP AVRCP HFP HSP BLE GATT (Generic Attribute Profile) |
| Drive units | 2 x 40mm dynamic full range bio cellulose driver |
| Microphones | 4x mics for ANC 2x mics for telephony |
| Distortion (THD) | <0.1% (1 kHz/10mW) |
| Battery type | Rechargeable Lithium Ion |
| Battery life & charging | 30 hours playback, 7 hours with a 15 min charge |
| In box accessories | 1.2m USB-C to 3.5mm stereo jack audio cable 1.2m USB-C to USB-C cable Carry Case |